Ford Mustang 2.3 ECO Boost Vandemon Electronic Valved Catback Exhaust System 2015-19
ON SALE Below cost!
VANDEMON Catback Electronic controlled valved exhaust system
GO FROM MILD TO WILD AT THE PRESS OF A BUTTON
Electronically select-able Valved Twin Muffler Catback Exhaust System for the Ford Mustang 2.3L Turbo, which is guaranteed to increase Hp and Torque throughout the entire RPM range for doing nothing more than replacing your OEM system to Vandemon
The Vandemon Valved Exhausts provide the best of both worlds. The driver can choose from two sound and performance levels via electronically valved free flow twin stage mufflers that make for a modest improvement in sound & power when exhaust valves are shut, over OEM or you can choose straight through for zero restriction and maximum power and torque by removing all resistance, which significantly increases turbocharger response in the lower RPM range along with an unmistakable sound that only Vandemon Exhausts offer.
Vandemon valved exhausts provide 100% muffler by-pass along with an unmistakable sound that is not intrusive or annoying in either straight-through or muffler mode.
Two purposes made weatherproof electronic servo's rotate stainless steel butterfly valves that won't seize over time, that direct gas flow through or around each muffler. Each motor is isolated from heat transference and not integrated into the muffler as found on some other brands which result in a high servo motor failure rates. Also, each servo motor has a custom wiring loom which clips into each motor via watertight connections and is routed into the boot and connected to the supplied receiver/ control module which is powered by a 12v lighter socket or can be hard-wired. The receiver is activated by push-button remote control you can hang from your key ring or mount in a convenient location.
The entire exhaust system is made from high quality polished 304 stainless steel consisting of 18% chromium & 8% nickel and is resistant to oxidation, corrosion, and won't stress fracture with age.
A purpose-made 3" to 2.5" cast stainless steel "Y" pipe efficiently split's the exhaust gas flow to both mufflers
The total exhaust fit up time takes only 30 minutes with an additional 45 min to run cabling and mounting of control module receiver.
The kit consists of:
- Jigged and Pre-assembled muffler assembly
- Link Pipe
- Control Module/ Receiver & 2 x Remotes
- Wiring harnesses
- Exhaust Clamps
- 2 x Carbon Fibre Exhaust tips
Perfect fit, No bending, drilling, Cutting or re-welding to make fit!
Fitting service available includes before and after dyno report for an extra fee
Pick Up or Delivered by TNT, Toll or Star Track