× Contact Us

Ford Mustang 2.3 ECO Boost Vandemon Electronic Valved Catback Exhaust System 2015-20

MS23FRDEXHSSVLB
  • $1,490.00 AUD




VANDEMON Catback Electronic controlled valved exhaust system


GO FROM MILD TO WILD AT THE PRESS OF A BUTTON


Electronically select-able Valved Twin Muffler Catback Exhaust System for the Ford Mustang 2.3L Turbo, which is guaranteed to increase Hp and Torque throughout the entire RPM range for doing nothing more than replacing your OEM system to Vandemon

The Vandemon Valved Exhausts provide the best of both worlds. The driver can choose from two sound and performance levels via electronically valved free flow twin stage mufflers that make for a modest improvement in sound & power when exhaust valves are shut, over OEM, or you can choose straight through for zero restriction and maximum power and torque by removing all resistance, which significantly increases turbocharger response in the lower RPM range along with an unmistakable sound that only Vandemon Exhausts offer.

Vandemon valved exhausts provide a 100% muffler by-pass and an unmistakable sound that is not intrusive or annoying in straight-through or muffler mode.


Two purposes made weatherproof electronic servo's rotate stainless steel butterfly valves that won't seize over time, that direct gas flow through or around each muffler. Each motor is isolated from heat transference and not integrated into the muffler as found on some other brands, which results in high servo motor failure rates. Also, each servo motor has a custom wiring loom, which clips into each motor via watertight connections and is routed into the boot and connected to the supplied receiver/ control module powered by a 12v lighter socket or can be hard-wired. The receiver is activated by push-button remote control you can hang from your key ring or mount in a convenient location.


Material:
The entire exhaust system is made from high quality polished 304 stainless steel consisting of 18% chromium & 8% nickel and is resistant to oxidation corrosion and won't stress fracture with age.

A purpose-made 3" to 2.5" cast stainless steel "Y" pipe efficiently split's the exhaust gas flow to both mufflers.

The total exhaust fit up time takes only 30 minutes, with an additional 45 min to run cabling and mounting of the control module receiver.


The kit consists of:

  • Jigged and Pre-assembled muffler assembly
  • Link Pipe
  • Control Module/ Receiver & 2 x Remotes
  • Wiring harnesses
  • Exhaust Clamps
  • 2 x Carbon Fibre Exhaust tips


Perfect fit, No bending, drilling, Cutting or re-welding to make fit!

Fitting service is available and includes before and after dyno reports for an extra fee.

Delivery Information
Pick Up or Delivered by TNT, Toll or Star Track

IMPORTANT! Vandemon Exhaust systems are designed for performance and modest sound improvements. We at Vandemon do not try to meet noise emission standards because the results would be no different from what your OEM exhaust can already achieve. Check with your country's governing body regarding noise emission standards rules and regulations.